24/7 Emergency Plumbing4.9 stars on Google

Home Tips10 min read

What is chloramine? What it does in an Orange County home, and how to get it out.

Eric Dean Olson

Eric Dean Olson

Licensed C-36 Plumbing Contractor

Key Takeaways
  • Chloramine is chlorine and ammonia together, and it's in most Orange County tap water. It keeps the water clean on its way to your house, and the water is safe to drink.
  • Most south county homes have been on chloramine since the mid-1980s. That's when the Metropolitan Water District of Southern California, which treats the imported water most of our districts deliver, switched from chlorine.
  • It's hard on some of the rubber in a house. Toilet flappers, washing machine hoses and the lining of older supply lines wear out faster. Whether it hurts copper pipe is still an open question.
  • To take it out, a filter has to be built for chloramine. That usually means catalytic carbon, and enough of it. A water softener doesn't remove it.

Folks ask us about the chlorine in their tap water. They want to know if it's hurting the house, and if a filter will take it out. In most of Orange County, though, what comes out of the tap isn't plain chlorine. It's chloramine.

It's safe to drink. Some of the rubber in your house has a harder time with it.

What it is, and why your water district uses it.

Chloramine is what keeps the water clean between the treatment plant and your faucet. It's chlorine with ammonia joined to it. It still disinfects the way chlorine does. It just holds on longer, and that's the point.

In south Orange County, most of our water travels a long way to get here, from the Colorado River and Northern California. It's treated at large plants and handed to your local water district. The Metropolitan Water District of Southern California, which treats that imported water, started adding chloramine in late 1984 and has used it for good since June 1985. It had four reasons: it leaves fewer byproducts from disinfecting, controls the slimy film inside pipes better, lasts longer, and smells less.

How much is in there? Not a lot: the districts that use it throughout reported averages of about 1.8 to 2.2 milligrams per liter for 2025, roughly half the legal limit of 4.0. But it's in every gallon that comes into the house, and the rubber parts feel it.

It's safe to drink, and your water district will tell you so. Ask Irvine Ranch Water District whether a home needs a filter for health, and its answer is "Absolutely not." But a rating for drinking water isn't a rating for your plumbing. Water can pass every test for drinking and still be hard on the fixtures and equipment in your house. That part is a plumber's question.

Good to Know

Most district water reports carry two cautions about chloramine: one for kidney dialysis, and one for fish, because it's toxic to them. If either one applies in your house, read that part of your district's report or give the district a call.

Is chloramine in my water?

In south Orange County, almost certainly. Most of the providers in this table name it in their own water quality reports.

Water providerWhere it servesDisinfectant
Irvine Ranch Water DistrictIrvine, most of Lake Forest, parts of Tustin, Newport Beach, Costa Mesa and OrangeChloramine
Moulton Niguel Water DistrictLaguna Niguel, Aliso Viejo, Laguna Hills, Mission Viejo, parts of Dana Point and San Juan CapistranoChloramine
Santa Margarita Water DistrictRancho Santa Margarita, Ladera Ranch, Coto de Caza, San Juan Capistrano, part of Mission ViejoChloramine
El Toro Water DistrictLaguna Woods, parts of Lake Forest, Laguna Hills, Aliso Viejo and Mission ViejoChloramine
City of San Clemente, City of Newport Beach, Mesa Water DistrictSan Clemente, Newport Beach, Costa MesaChloramine
Tustin, Santa Ana, Orange and Yorba LindaThose citiesChlorine on the local wells, chloramine in the imported water

Not sure who serves your street? Our guide to Orange County water hardness by city has a city lookup. South Coast's and Laguna Beach's reports mention chloramine only in general terms, and Trabuco Canyon's doesn't name a disinfectant. All three bring in water treated by Metropolitan, which uses chloramine. A call to the district, or a test at your tap, settles it. Four of the reports are a click away: Irvine Ranch, Moulton Niguel, Santa Margarita and El Toro.

Chloramine vs chlorine: what's the difference?

Think of chlorine as a sprinter and chloramine as a distance runner. Chlorine does its work and fades. Chloramine keeps going, so it's still in the water when the water finally reaches your house.

That staying power is also what makes it harder to get out, and why a filter has to be built for it. Chloramine also carries less of the taste and smell people notice with chlorine, so you may not know it's there.

What it does inside the house.

The water is safe to drink. But chloramine is aggressive as it's cleaning, and it doesn't stop when the water gets to your house. What that means comes down to what each part is made of.

The rubber parts.

Take the lid off your toilet tank and look at the flapper. That's the rubber flap at the bottom that holds the water in until you flush. On chloramine water, natural rubber like that wears out faster than it does on chlorine. It goes soft and gummy, a little like an old pencil eraser that smears instead of erasing. A flapper in that shape can't seal, so water trickles into the bowl and the toilet runs or refills on its own.

The same thing happens to other rubber in the house: the hoses on the washing machine, the gaskets on the water heater, and the lining inside older braided supply lines, the flexible lines that feed your toilets and faucets. As the rubber breaks down, it comes apart in soft black flakes or greasy bits. Black flakes in the toilet tank or at a faucet are the sign to look for.

Those little rubber parts do a big job. When you tighten a water supply line, it squeezes a rubber gasket, and that gasket is what keeps the water in the line. They're all over a house: where the supply line meets the shutoff valve under a toilet, on the lines to the water heater, even inside some shower cartridges. When a gasket breaks down, water starts to seep out. Sometimes it's slow. Sometimes it's fast. Either way, a leak does damage, and that damage is preventable.

Eric Dean Olson
Expert Tip

When a flapper or a supply line wears out on chloramine water, ask for a replacement made to stand up to it: a flapper in silicone or another synthetic rubber, or a supply line in copper or nylon.

The photo here is the inside of a toilet tank on one of our jobs. The water in a tank should be clear, with no sediment and no black specks. When you see anything else in yours, something needs a look. Sometimes the fix is easy: a new flapper, or a new gasket. The longer answer is treating the water. Doing nothing is the one wrong move.

Black specks on the floor of a toilet tank beside a faded red flapper
  1. Black specks on the tank floorThe water in a tank should be clear, with no sediment and no black specks.
  2. The flapperThe rubber flap at the bottom that holds the water in until you flush.
Black specks on the bottom of a toilet tank in Newport Beach, beside a faded flapper.

If a toilet keeps running after you flush, that's a toilet repair our guys can take care of.

Copper pipe: the honest answer.

Copper is the big question, and I want to be straight with you about it.

You'll hear it around here that chloramine causes pinhole leaks in copper. A pinhole leak starts as a tiny pit on the inside wall of the pipe, and the pit keeps working outward until the water finds its way through. Enough people blamed chloramine for those pits that it went to court. In 2011 and 2012, homebuilders sued south county water districts over it, and homeowners filed too. The districts won: an Orange County judge ruled for them in 2015, and the state Court of Appeal agreed in 2018. What the courts decided is narrower than it sounds. The state had approved adding chloramine, so the districts couldn't be sued as a nuisance just for adding it. Whether it caused the leaks was a different question, and in the court's own words, "causation and damages were not at issue." No court has ruled on that.

And chloramine isn't the only suspect. Here, hard water leaves mineral scale along the pipe wall, the hot side runs hotter, and a lot of homes were plumbed with Type M copper, the thinnest-walled grade. The research is mixed. The plumbing engineers' society says chlorine and chloramine both corrode copper, and that some studies found chloramine the gentler of the two in certain water. A 2019 review for the Water Research Foundation reported that with new copper, the effects of either disinfectant on how much copper gets into the water "were transient," meaning they faded. A look back over 30 years of research still calls copper pitting "poorly understood" and lists the switch to chloramine as an open question. Irvine Ranch Water District says it "is not aware of any established relationship" between its treatment and pinhole leaks.

So here's where I land. The rubber wear is real, and so is the hard-water scale I'll get to next. You can see both in your own house. Copper is an open question, and nobody can tell you it's settled, either way. If your copper is leaking, a filter won't fix it. Finding the leak will. And if you're weighing a repipe, our guide to copper vs PEX walks through the choice.

Water heaters.

On a water heater, hardness is the bigger story. South Orange County's water averaged about 12 to 17 grains per gallon in 2025, depending on the district, which is very hard by the U.S. Geological Survey's measure. Rinnai, Navien and Noritz each draw a line at about 12 grains, and most of our water sits above it. That's why a tankless here needs its yearly maintenance visit, and the flush is only one part of it. Our guide to tankless water heater maintenance covers the rest.

Eric Dean Olson

Early in my career I went up to the Bay Area to help a friend who was starting his own plumbing company. Coming from Orange County, I test the water wherever I go. In the homes I tested up there, the water was naturally soft, with no treatment system at all, and I was amazed. I asked my friend how often he goes out to replace the parts we replace all the time down here. He said, "Almost never." Same plumbing, different problems.

On a tank or a tankless, chloramine works on the rubber: the gaskets and hoses, the same as on the washing machine.

The heat exchanger is a longer story. It's the coil inside a tankless that the water runs through while the burner heats it. A lot of tankless heaters were built with copper heat exchangers, and their makers went through a stretch of warranty callbacks on units that failed early. Was the heater built wrong? Often the answer was no. The tankless was a great piece of equipment. Often it was what was in the water going into it. That's why there's a whole market of products made just to protect a tankless from scale. Over the years, a lot of units moved to stainless steel. Rinnai uses stainless in its condensing models "due to the corrosive nature of condensation" and still uses copper in the rest. I haven't seen a maker tie the change to chloramine.

Water softeners.

If you have a water softener, chloramine works on it too. Inside the tank is a bed of tiny resin beads, and they're what pull the hardness out of the water. Chlorine and chloramine damage that resin. Carbon in the same system protects it. That's the benefit of adding a whole house water filter, a filter where the water comes into the house, along with a water softener: the filter actually removes the chloramine.

Eric Dean Olson

I was working at Pete's house in Laguna Hills. I had just put in a brand-new water treatment system, one Pete had looked into and picked out himself, and something wasn't right. I called the maker for support. They asked for the zip code and the address. Then they told me they didn't want that model installed in his neighborhood. I was shocked. Wasn't the unit supposed to fix the water? What they told me was that the model he'd picked wasn't built for the chlorine in the water here, and that using it here would have voided its warranty. That one house is what made me start looking a lot harder at the products I put in people's homes.

How to remove chloramine from water.

Start with what won't do it. A water softener takes out hardness, not chloramine. Leaving a pitcher of water on the counter won't clear it either. Chloramine is built to last.

What does take it out is carbon: the right kind, and enough of it.

The right kind is catalytic carbon. It's carbon made to handle chloramine. Plain carbon that handles chlorine can do the work too, but it has to be about four times the size, so a filter sized for chlorine comes up short on chloramine. It's what's in the systems we install for chloramine.

Enough of it is the part you can't see. Two filters can look exactly the same on the outside and be different on the inside. One tank might be only an inch or two wider, and a homeowner would never notice, but it holds more media, the material inside that does the filtering. With chloramine, that difference counts.

Because a whole house water filter sits where the water comes in, every tap gets filtered water, and so do the flappers, the hoses, the water heater and the softener. These are the whole house water treatment systems we install for chloramine, and what's in each tank:

  • HALO 5: catalytic carbon, which its spec sheet calls "an outstanding material for successfully reducing free chlorine and chloramine."
  • Evince INSIGHT: a cubic foot and a half of catalytic carbon, for "maximum reduction of chlorine and chloramines."
  • Evince ELEVATE and ELITE: catalytic carbon and a softener in one system.

Which one fits comes down to the house. We plan the water treatment for each home around what the family wants and what's in the water. Around here that's nearly always two things, hard water and chlorine or chloramine, so we want a system that handles both. A HALO 5 does: it filters the water, and it conditions it so less scale builds up. What each one runs is in our guide to HALO 5 and Evince water systems. Still deciding what kind of system you need? Start with water softener, whole house filter, or reverse osmosis. The basics are on our water treatment page.

The system in the photo here is a HALO 5 on one of our jobs. We care about who makes what we install. When something hasn't gone the way we planned, the people behind this one have picked up the phone and made it right.

HALO 5 whole house water filter tied into copper pipe with a shutoff and hose bib
  1. A shutoff on the lineA shutoff valve on the copper line into the system.
  2. HALO 5Its spec sheet calls its catalytic carbon "an outstanding material for successfully reducing free chlorine and chloramine."
A HALO 5 whole house filter on one of our jobs in Newport Beach, tied in with copper, a shutoff and a hose bib.
A lot of folks think water filtration is about smell and taste. In my opinion, the greatest contribution is reducing the chlorine content.

Something smaller. Under the sink, in the shower or in a pitcher, the label is your check. Look for chloramine by name under NSF/ANSI 42, the standard that covers chlorine and chloramine claims, and look the model up on the certifier's own listing, not just the box. Shower filters have their own standard, NSF/ANSI 177, and it covers plain chlorine only, not chloramine. The reverse osmosis units we install have carbon ahead of the membrane, the very fine filter inside the unit, and their makers don't list chloramine among what they reduce.

Good to Know

A chlorine claim isn't a chloramine claim. NSF puts it plainly: "While many systems are certified to reduce chlorine, this doesn't mean they will also be effective at reducing chloramines or disinfection byproducts like trihalomethanes."

Shopping for a whole house chloramine filter is different. Few whole house filtration systems carry a chloramine certification, so ask two things: what kind of carbon is inside the tank, and how much.

Before anyone talks to you about a system, test the water. Our guys carry a hardness meter and a chloramine test kit, and they can test right at your kitchen tap.

Eric Dean Olson
Expert Tip

A good doctor never writes a prescription without a diagnosis first. It's the same with water: test first, then recommend. We don't make recommendations off feelings. We make them off facts.

When we test the water, it turns a color. That color tells us what's in the water, and what the next step should be.

Hand holding a test vial of blue-purple water over a white kitchen counter
  1. The color chartA test color chart, standing on the counter.
  2. The water sampleWhen we test the water, it turns a color. That color tells us what's in the water, and what the next step should be.
A water sample in a test vial at a kitchen counter in Coto de Caza, with a test color chart standing by the sink.

Want to know what's in your water? Our guys will test it at your tap, hardness and chloramine both, and tell you what they find. Call (949) 328-6002.

Schedule a visit

Frequently Asked Questions

Only if that filter is certified for chloramine. A chlorine claim on the box isn't a chloramine claim, so look for chloramine named on the box or the listing before you count on it. Even then, a pitcher only covers the water you pour from it. The flappers, the washer hoses and the water heater in the house still get chloramine, and that's a job for a whole house filter.

Yes, if it's the right carbon and enough of it. Catalytic carbon is the kind made for chloramine. Plain carbon can do the work too, but the filter has to be about four times the size of one built for chlorine. So two filters that look the same on the outside can do very different jobs on chloramine. Ask what's inside the tank.

No. It's safe to drink, and Irvine Ranch Water District's answer to whether a home needs a filter for health is "Absolutely not." The two cautions in the district reports are for kidney dialysis and fish. Chloramine shows up in the house: the rubber parts wear out sooner. That's the reason to think about a filter, not your health.

No. A softener takes out hardness, not chloramine. Chloramine actually wears on the softener's resin, the tiny beads that pull the hardness out. That's why carbon belongs in the same system: it protects the resin, and it takes the chloramine out of the water for the rest of the house too.

Nobody has settled it. The research is mixed, and Irvine Ranch says it knows of no established link to pinhole leaks. When builders sued over it, the courts sided with the water districts but never ruled on whether chloramine caused the leaks. What's settled is that it's hard on rubber parts. If your copper is leaking, find the leak. A filter won't fix it.

Look for chloramine by name, not just chlorine, under NSF/ANSI 42, the standard that covers both claims. Then look the model up on the certifier's own listing, not just the box. Shower filters are certified under NSF/ANSI 177, which covers plain chlorine only. Few whole house filtration systems carry a chloramine certification, so for those, ask what kind of carbon is inside and how much.

No. Chloramine is made to last in the water, all the way from the plant to your tap, so leaving it out on the counter doesn't clear it. A filter built for chloramine does.

In most of south Orange County, it's chloramine. Tustin, Santa Ana, Orange and Yorba Linda use chlorine on their own wells and chloramine in the water they buy. Most water quality reports name it, or our guys can test it at your tap and settle it.

The Bottom Line

Chloramine is chlorine and ammonia, and it's in most Orange County tap water. It keeps your water safe to drink, and it's hard on the rubber in a house: the flapper, the washer hoses, the gaskets. On copper, nobody has settled it. To take chloramine out, you need a filter built for it, with catalytic carbon and enough of it. A softener won't do that job.

Want to keep a plumber out of your house? Take care of the water. We change the oil in our cars and check the fluids. A home is usually the biggest investment a family makes, and it deserves the same care.

If you're not sure what's coming out of your tap, that's an easy one to answer. Call (949) 328-6002 or schedule a visit, and our guys will test it right at your kitchen sink and tell you what they find. To see what your district's water runs for hardness, start with Orange County water hardness by city.

Written by Eric Olson, Licensed C-36 Plumbing Contractor, Olson Superior Plumbing, Orange County, CA. CSLB license #1045399. Serving Orange County homes since 2008.

Share this post

Eric Dean Olson

Written by

Eric Dean Olson

Founder & Chief Vision Officer, Licensed C-36 Plumbing Contractor, CA #1045399

Eric Olson is a Licensed C-36 Plumbing Contractor and Founder of Olson Superior Plumbing, where he's built a portfolio of home services businesses generating more than $25 million in annual revenue. With more than 18,000 homes served since founding the company in 2008, Eric brings real field experience to every article he writes — from water heater diagnostics to whole-home repiping. BBB A+ accredited. Top 5% of California contractors.

24/7 emergency plumbing & HVAC service

Call us anytime — day or night, weekends and holidays. Our team is always ready to help.

Schedule Service