Lake Forest Plumbing specialist say, mold can hide in places that the average homeowner may perhaps not think to check.
Well, rather than inspect every inch of a home in search of mold spores there is a more efficient way to determine whether or not mold is present.
You can do this by simply sampling the air in the household in question.
This is often a wise step to take after a home has suffered from some severe form of water damage caused with a backed up storm sewer or aftermath of a fire.
Air sampling for mold is just one of several tools used today.
Air Sampling Techniques
Lake Forest Plumbing professionals say, there are several techniques for collecting air samples to be able to try for mold.
These generally include impact sampling — which takes a calibrated air sample and injects captured spores onto a slide for examination using a microscope.
Single-use cassette samples which also use forced air to collect samples and particle collectors which can trap mold on a dish to be examined later.
Two Important Items to Remember
Lake Forest Plumbing specialist say, air sampling for mold should be achieved by processionals.
Mold can be anywhere in a home so multiple websites has to be examined in order for any evaluation for mold to be truly revealing.
Guidelines for Mold Air Sampling
- Any testing to be meaningful multiple samples must be taken in many locations. We make sure that samples are taken at the complaint area and that a control sample is taken within an area that has not yet been affected with mold. (For example, a sample can be taken outside in the winter, etc.)
- Sampling: Address any questions that you may have about mold sampling, the procedures we use and the actions that people advise are taken when the results are understood.
- Interpreted Accurate Data: Utilize thorough testing solutions to guarantee that the results we get are accurate and complete. This is the only way that the family and home can be protected against the health dangers posed by mold.
- There are limitations of air sampling: air sampling is only one aspect of a battery of tests that must be taken once mold is suspected. Specialist will visually inspect the area and conduct other evaluations as well.
For industry insights, announcements, and tips, make sure to follow our blog at: olsonsuperior.com/blog
