24/7 Emergency Service

Olson Superior Blog

Read Why Olson Superior Plumbing is Orange County’s #1 Plumber 

FOLLOW OUR JOURNEY

Lake Forest Plumbers say even if the mold issue doesn’t appear severe, water stains are a huge indication that black mold may start to grow.

Mold Growth – Lake Forest Plumbers

Lake Forest Plumbers say to start this process, you are likely to want to eradicate the outside wall covering to assess the damage within the wall.

While the sheetrock may appear to be fine, the mold spores are still climbing from the interior.

Scrubbing Your Home

Lake Forest Plumbers say when doing this, make sure that each segment has been completely cleaned.

If the issue still exists, consider choosing a professional mold removal specialist to handle the situation.

The main difference between mold and efflorescence is that efflorescence is just found on buildings.

White mold is harder to find in comparison with black and green mold.

You will want to eliminate mold immediately to keep it from growing at an exponential rate.

To get rid of mold, you want to kill it on the place.

Keeping your home dry and wiping away the mold will decrease the chances of white mold reappearing again.

Mold Infestation

Efflorescence has a propensity to create hard, masonry surfaces such as cement, rock, and brick.

This is a conglomeration of all the minerals and salts and tends to stick to the surface for a protracted period.

While efflorescence is not a significant issue such as mold, it is the symptom of extra water that’s stuck onto the masonry.

That’s the reason you have to remove it immediately to avoid health and structural issues from occurring.

Like humans, building materials contain natural salts such as calcium chloride and sodium.

These salts remain solid interior of the masonry until it dissolves.

Efflorescence is usually found during however cold climates where the buildings begin to dry outside.

To safeguard against the rise of efflorescence, utilize an impregnating hydrophobic sealant onto the surface.

This helps prevent the intrusion of water from getting into the masonry of the structure.

Using water to remove it might cause for the crystals into re-absorb which leads to efflorescence to appear.

Way To Avoid Mold

Fortunately, there are a few procedures to help stop mold from spreading across your home.

The main solution you will want to use is a mixture of bleach and water.

An alternative solution would be to get a dehumidifier.

Dehumidifiers operate by lowering your humidity levels interior of your home.

Maintain your dehumidifier’s humidity level below 45 percent to be able to maintain your house from mold spores that are developing.

You can also look into air humidifiers.

Air humidifiers work by removing the air dust particles located in the air.

While it may not be as useful as a dehumidifier, it does a great job at keeping your home free from air mold from penetrating your walls.

Mainly, these solutions may help you prevent mold from spreading.

Make certain that you frequently check your walls and areas to determine if any extra mould is apparent.

This will eliminate the mold from your area when preventing future mold spores from spreading throughout your living space.

 

If you have any questions, call our 24/7 Rapid Response Team at 949-328-6002 or email us at [email protected]If you want more information online, please visit us @ https://www.OlsonSuperior.com

For industry insights, announcements, and tips make sure to follow our blog at: olsonsuperior.com/blog

FEATURED VIDEO:

FEATURED COUPON:

FOLLOW OUR JOURNEY!

wpChatIcon