24/7 Emergency Service

Olson Superior Blog

Read Why Olson Superior Plumbing is Orange County’s #1 Plumber 

FOLLOW OUR JOURNEY

Lake Forest Plumbing pros say, even if the mold issue doesn’t appear serious, water stains are a huge sign that black mold might start to grow.

To start this process, you’re going to want to eradicate the outside wall covering to assess the damage within the wall.

While the sheetrock may appear to be fine, the mold spores are still growing from the inside.

Scrubbing Mold – Lake Forest Plumber

Lake Forest Plumbing pros say, when doing this, make certain that each section has been thoroughly cleaned.

If the problem still exists, consider choosing a professional mold removal specialist to handle the situation.

The main difference between mold and efflorescence is that efflorescence is just found on buildings.

White mold is a natural fungus that starts to rise once there is a sufficient amount of humidity in the area.

White mold is harder to find in comparison with black and green mold.

You’ll want to remove mold immediately to keep it from growing at an exponential rate.

To get rid of mold, you want to kill it on the spot.

Keeping your home dry and wiping away the mold will lessen the chances of white mold reappearing again.

Infestations

Lake Forest Plumbing pros say, if the infestation is too much of a problem, think about hiring a professional mold removal company.

Efflorescence has a tendency to grow hard, masonry surfaces such as cement, rock, and brick.

This is a conglomeration of all the minerals and salts and tends to stick on the surface for an protracted period.

While efflorescence is not a serious issue such as mold, it’s the symptom of excess water that’s stuck onto the masonry.

That’s the reason you have to remove it immediately to avoid health and structural issues from occurring.

Like humans, construction materials contain natural salts such as calcium chloride and sodium.

These salts remain solid interior of the masonry until it dissolves.

Efflorescence is usually found during yet cold climates where the buildings begin to dry outside.

To protect against the rise of efflorescence, utilize an impregnating hydrophobic sealant on the surface.

This helps stop the intrusion of water from getting into the masonry of your construction.

Using water to remove it might cause for the crystals to re-absorb which leads to more efflorescence to appear.

If you are planning to eliminate efflorescence make certain that you wash it afterwards.

The Best Way To Avoid Mold

Fortunately, there are a few methods to help prevent mold from spreading across your home.

The main solution you will want to use is a mixture of bleach and water.

An alternative solution would be to get a dehumidifier.

Dehumidifiers work by lowering your humidity levels interior of your home. Maintain your dehumidifier’s humidity level under 45 percent in order to maintain your house from growing mold spores.

Third, you can also look into air humidifiers.

Air humidifiers work by removing the air dust particles located in the air.

While it may not be as useful as a dehumidifier, it does a good job at keeping your home free from air mold from penetrating your walls.

Mainly, these solutions may help you prevent mold from spreading.

Make sure to frequently check your walls and areas to determine if any extra mold is apparent.

Doing this guarantees that you’ll completely remove the mold from your area while preventing future mold spores from spreading during your living space.

 

For industry insights, announcements, and tips, make sure to follow our blog at: olsonsuperior.com/blog

FEATURED VIDEO:

FEATURED COUPON:

FOLLOW OUR JOURNEY!

wpChatIcon